MBL INDUSTRIES, INC. -- STAINLESS STEEL MAINTAINER -- 7930-00F008171
===================== Product Identification ===================== Product ID:STAINLESS STEEL MAINTAINER MSDS Date:11/01/1985 FSC:7930 NIIN:00F008171 === Responsible Party === Company Name:MBL INDUSTRIES, INC. Address:3600 W. CARRIAGE DR. City:SANTA ANA State:CA ZIP:92704 Info Phone Num:(714) 557-6505 Emergency Phone Num:(714) 557-6505 CAGE:OO200 === Contractor Identification === Company Name:MBL INDUSTRIES, INC. Phone:( 714)557-6505 CAGE:OO200 ============= Composition/Information on Ingredients ============= Ingred Name:NAPHTHALENE (SARA III) CAS:91-20-3 RTECS #:QJ0525000 Other REC Limits:10 PPM OSHA PEL:10 PPM/15 STEL ACGIH TLV:10 PPM/15 STEL; 9192 EPA Rpt Qty:100 LBS DOT Rpt Qty:100 LBS Ingred Name:ISOBUTANE CAS:75-28-5 RTECS #:TZ4300000 Other REC Limits:1000 PPM OSHA PEL:1800 MG/CUM Ingred Name:PROPANE CAS:74-98-6 RTECS #:TX2275000 Other REC Limits:1000 PPM OSHA PEL:1000 PPM ACGIH TLV:ASPHYXIANT; 9192 ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:INGESTION: NAUSEA. EYES/SKIN: IRRITATION. INHALATION: HEADACHE, DIZZINESS Explanation of Carcinogenicity:NONE Effects of Overexposure:INGESTION: NAUSEA. EYES/SKIN: IRRITATION. INHALATION: HEADACHE, DIZZINESS. ======================= First Aid Measures ======================= First Aid:INGESTION: DON'T INDUCE VOMITING. CALL A PHYSICIAN IMMEDIATELY. EYES: FLUSH WITH WATER. IF IRRITATION PERSISTS, SEEK MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR. GIVE MOUTH TO MOUTH RESUSCITATI ON OR OXYGEN AND CALL A PHYSICIAN IMMEDIATELY. SKIN: FLUSH WITH WATER & SEEK MEDICAL ATTENTION. ===================== Fire Fighting Measures ===================== Flash Point:NON-FLAMMABLE Extinguishing Media:WATER FOG, FOAM, CO2, DRY CHEMICAL, HALON Fire Fighting Procedures:KEEP CONTAINERS COOL. USE EQUIPMENT OR SHIELDING TO PROTECT PERSONNEL AGAINST BURSTING OR VENTING CONTAINERS. DON'T PUNCTURE OR INCINERATE CONTAINER. Unusual Fire/Explosion Hazard:EXPOSURE TO TEMPS >120F MAY CAUSE BURSTING OR VENTING. ================== Accidental Release Measures ================== Spill Release Procedures:FLUSH WITH WATER, APPLY AN ABSORBENT MATERIAL & DISPOSE. PROVIDE VENTILATION. ============= Exposure Controls/Personal Protection ============= Ventilation:LOCAL EXHAUST: ADEQUATE Supplemental Safety and Health ================== Physical/Chemical Properties ================== Vapor Pres:40-50 Vapor Density:>AIR Spec Gravity:<1.0 Evaporation Rate & Reference:(WATER =1): <1 Solubility in Water:SLIGHTLY SOLUBLE Appearance and Odor:WHITE/SOLVENT ODOR LIGHT MISTY SPRAY ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES NONE Stability Condition to Avoid:DON'T STORE >120F. ==================== Disposal Considerations ==================== Waste Disposal Methods:DON'T PUNCTURE OR INCINERATE "EMPTY" OR FULL CANS. ONCE SPILLS OR LEAKS ARE CLEANED UP. DISPOSE OF WASTE IN ACCORDANCE WITH GOVERNMENTAL ORDINANCES. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.